IHPG - Hydraulic Power Generator

Datasheet

Specifications are indicative. Final specification is confirmed at quotation.

Size Range

DN50-DN200

Pressure Class

PN16

End connection

EN 1092-2 flange

Available sizes

Standard DN sizes covered by this product. Confirmed at quote.

Configure your variant(manually adjust box on the right if you require a different spec)

Size

DN100 (4")DN125 (5")DN150 (6")DN200 (8")DN250 (10")DN300 (12")DN350 (14")DN400 (16")DN450 (18")DN500 (20")DN600 (24")DN700 (28")DN800 (32")DN900 (36")DN1000 (40")

Pressure

PN10PN16PN25

End connection

EN 1092-2 flange

Materials

All available material options per part. Click a pill to set it in the configurator.

Pressure-temperature rating

Maximum working pressure at each temperature, per pressure class.

Approvals

Features

• The IHPG in-line hydraulic power generator is installed directly in the pipeline and converts flow energy into electrical power
• The generated DC output (adjustable from 24V, supporting 12V - 24V DC charging) powers remote telemetry units, pressure transmitters, flow meters and SCADA equipment at locations where mains power is unavailable or uneconomic to install
• Fully self-contained with IP68 protection
• Available from DN100; valve size range DN50 - DN1000
• Pressure ratings PN10, PN16 and PN25 per EN 1092-2

Description

In-line generator for telemetry and sensor power. The IHPG in-line hydraulic power generator is installed directly in the pipeline and converts flow energy into electrical power. The generated DC output (adjustable 0.5-30V) powers remote telemetry units, pressure transmitters, flow meters and SCADA equipment at locations where mains power is unavailable or uneconomic to install. Fully self-contained with IP67 protection.