Y Type Strainer

Datasheet

Specifications are indicative. Final specification is confirmed at quotation.

Size Range

DN40-DN600

Pressure Class

PN10/PN16

Standards

EN-12266-1, BS EN558-1, BS2080, EN1092-2, BS4504, DIN 3476-1, EN 14901, DIN F1

End connection

EN1092-2 / BS4504 flange

Face-to-face

DIN F1

Available sizes

Standard DN sizes covered by this product. Confirmed at quote.

Configure your variant(manually adjust box on the right if you require a different spec)

Size

DN40 (1 1/2")DN50 (2")DN65 (2 1/2")DN80 (3")DN100 (4")DN125 (5")DN150 (6")DN200 (8")DN250 (10")DN300 (12")DN350 (14")DN400 (16")DN450 (18")DN500 (20")DN600 (24")

Pressure

PN10PN16

End connection

EN1092-2 / BS4504 flange

Materials

All available material options per part. Click a pill to set it in the configurator.

body

Cast ductile iron

o ring

EPDM

Body

Ductile Iron

Bolt

SS AISI 304

Bonnet

Ductile Iron

Flat Washer

SS AISI 304

O Ring (items 6 and 8)

NBR

Plug

SS AISI 304

screen

SS304

Screen

SS AISI 304

Operating media

Coatings

Approvals

Features

• Screen superficial area is 4 times the relative pipe area, providing low flow resistance
• Blind cover fitted with drain plug for in-situ drainage of collected impurities without cover removal
• Removable filter cartridge for cleaning and reinstallation
• EPDM O-ring approved for drinking water
• Double flanged ends
• Water mesh: 18-30 mesh; air/gas mesh: 10-100 mesh; oil mesh: 100-480 mesh
• Y-pattern strainer body with flanged ends
• Perforated screen; hole pitch dimension A and hole diameter d tabulated per DN
• Removable bonnet secured by bolts with flat washers for screen access and cleaning
• Drain plug fitted to bottom of screen chamber
• Face-to-face tolerance ±3 mm
• Flange bolt-hole count and diameter (n-d) varies by DN

Notes

• Other size and pressure are available as special request
• Other materials are available as special request
• Diagram: Sectional/dimensional drawing of flanged Y-strainer showing overall length L (±3 mm), overall height H, flange OD (D), bolt-circle diameter (K), bore diameter (DN), flange thickness (B), bolt-hole count and diameter (n-d), and internal bore D1. Eight numbered parts indicated with leaders. Inset shows perforated screen hole pattern with pitch dimension A and hole diameter d. Parts schedule table lists: 1-Body (Ductile Iron), 2-Screen (SS AISI304), 3-Flat Washer (SS AISI304), 4-Bolt (SS AISI304), 5-Plug (SS AISI304), 6-O Ring (NBR), 7-Bonnet (Ductile Iron), 8-O Ring (NBR).

Description

Y Type Strainer Brief description: DIN-F1 (DN40-600) Y-type Strainer is an indispensable device on the transmission pipeline. It is usually installed at the inlet of pressure reducing valve, pressure relief valve, water level control valve or other equipment to eliminate impurities in the medium and protect the normal use of valves and equipment. When the fluid enters the filter cartridge with a certain size of filter screen, its impurities are blocked, and the clean filtrate is discharged from the strainer outlet. When cleaning is required, the removable filter cartridge can be removed and then reinstalled after cleaning. SEND INQUIRY CHAT NOW Product Detail FAQ Product Tags Product Description Y type Strainer, which is is the filtration equipment which is to prevent impurities in the flo

Available pressure classes

Pressure classes this product is rated to.