Y Type Strainer

Name: Y Type Strainer
Brand: Euro Flow Control
SKU: EFC-334
Availability: InStock

Debug · supplier source (internal only)

Supplier product page ↗EFC datasheet PDF ↗supplier: zd · ref: 334

Specifications

Confirmed at quote

Size Range: DN40-DN600
Pressure Class: PN10/PN16
Standards: EN-12266-1, BS EN558-1, BS2080, EN1092-2, BS4504, DIN 3476-1, EN 14901, DIN F1
End connection: Double flanged ends (EN1092-2 / BS4504)
Face-to-face: DIN F1

Available sizes

Standard DN sizes covered by this product. Confirmed at quote.

DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600

Available pressure classes

Pressure classes this product is rated to.

PN10 PN16

Configure your variant(manually adjust box on the right if you require a different spec)

Size
Pressure
End connection

Materials

All available material options per part. Click a pill to set it in the configurator.

body
o ring
Body
Bolt
Bonnet
Flat Washer
O Ring (items 6 and 8)
Plug
screen
Screen

Operating media

waterneutral liquidsoilgas

Coatings

Potable water approved epoxy coating, fusion bonded according DIN 3476-1, EN 14901

Approvals

WRASEN1092-2BS4504PN10/16BS2080 (face-to-face)DIN-F1 (face-to-face)WRAS Approved ProductISO 9001ISO 45001ISO 14001

Features

Screen superficial area is 4 times the relative pipe area, providing low flow resistance
Blind cover fitted with drain plug for in-situ drainage of collected impurities without cover removal
Removable filter cartridge for cleaning and reinstallation
EPDM O-ring approved for drinking water
Double flanged ends
Water mesh: 18–30 mesh; air/gas mesh: 10–100 mesh; oil mesh: 100–480 mesh
Y-pattern strainer body with flanged ends
Perforated screen; hole pitch dimension A and hole diameter d tabulated per DN
Removable bonnet secured by bolts with flat washers for screen access and cleaning
Drain plug fitted to bottom of screen chamber
Face-to-face tolerance ±3 mm
Flange bolt-hole count and diameter (n-d) varies by DN

Notes

Other size and pressure are available as special request
Other materials are available as special request
Diagram: Sectional/dimensional drawing of flanged Y-strainer showing overall length L (±3 mm), overall height H, flange OD (D), bolt-circle diameter (K), bore diameter (DN), flange thickness (B), bolt-hole count and diameter (n-d), and internal bore D1. Eight numbered parts indicated with leaders. Inset shows perforated screen hole pattern with pitch dimension A and hole diameter d. Parts schedule table lists: 1-Body (Ductile Iron), 2-Screen (SS AISI304), 3-Flat Washer (SS AISI304), 4-Bolt (SS AISI304), 5-Plug (SS AISI304), 6-O Ring (NBR), 7-Bonnet (Ductile Iron), 8-O Ring (NBR).

Description

Y Type Strainer Brief description: DIN-F1 (DN40-600) Y-type Strainer is an indispensable device on the transmission pipeline. It is usually installed at the inlet of pressure reducing valve, pressure relief valve, water level control valve or other equipment to eliminate impurities in the medium and protect the normal use of valves and equipment. When the fluid enters the filter cartridge with a certain size of filter screen, its impurities are blocked, and the clean filtrate is discharged from the strainer outlet. When cleaning is required, the removable filter cartridge can be removed and then reinstalled after cleaning. SEND INQUIRY CHAT NOW Product Detail FAQ Product Tags Product Description Y type Strainer, which is is the filtration equipment which is to prevent impurities in the flo