Metal Seated Eccentric Butterfly Valve

Size Range

DN50, DN65, DN80, DN100, DN125, DN150...

Pressure Class

Class 150

Standards

BS 1868, API 609, ASME B16.10, API 6D, API 598, ASME B16.34, MSS SP-55, MSS SP-25

Available sizes

Standard DN sizes covered by this product. Confirmed at quote.

Configure your variant(manually adjust box on the right if you require a different spec)

Size

DN50 (2")DN65 (2 1/2")DN80 (3")DN100 (4")DN125 (5")DN150 (6")DN200 (8")DN250 (10")DN300 (12")DN350 (14")DN400 (16")DN450 (18")DN500 (20")DN600 (24")

Pressure

Class 150

End connection

Flanged ASME B16.5 150LB

Materials

All available material options per part. Click a pill to set it in the configurator.

body

A216 Gr. WCBA216 Gr. WCCA216 Gr. WCAA352 Gr. LCBA352 Gr. LCCA352 Gr. LC1A217 Gr. WC6A217 Gr. WC9A217 Gr. C5A217 Gr. C12A217 Gr. C12AA351 Gr. CF8A351 Gr. CF8MA351 Gr. CF3A351 Gr. CF3MA351 Gr. CF8CCN7M alloy 20CN3M alloy 20 modifiedCT15CA995 Gr. 4AA995 Gr. 5AA995 Gr. CE8MNA995 Gr. CD6MNA995 Gr. CD3MNB148 C95500B148 C95600B148 C95800M30CM35-1CZ100CY40 inconel 600CW2m Hastelloy C4N12MV Hastelloy BCW12MW Hastelloy C276CU5MCuC Incoloy 825CW6MC Incoloy 625

Actuation options

Approvals

Features

• Triple eccentric / offset disc design minimises wear during operation
• Metal-to-metal seating
• Quarter-turn operation
• Multiple body material options including carbon steel, stainless steel, alloy steel, super duplex, aluminium bronze, Monel, Inconel, Hastelloy, and Incoloy
• Corrosion-resistant coating options
• Triple-offset (triple eccentric) disc geometry
• Flanged body with raised-face flanges
• Gearbox (worm gear) actuator fitted as standard shown
• Multi-level seal packing collar on disc/body seating area
• Clamp-retained seat arrangement
• Separate clamp component securing seat packing collar
• Body and disc identified as distinct sealing components in sectional callout
• Part numbering 1–12 visible on sectional diagram (detail not fully legible)
• Dimension references: L (face-to-face), DN (nominal bore), D1 (bolt circle diameter), n-M (number and size of flange bolts)
• Metal-to-metal seat configuration visible in product photos
• Available in multiple finish/material variants: blue-painted ductile iron/cast iron body with bronze disc (index 0); stainless steel body and disc (index 1 and 2); red-painted body (index 3); bare stainless/carbon steel (index 4 and 5)

Notes

• Diagram: Sectional/assembly drawing of a triple-offset flanged butterfly valve showing: front elevation with flange bolt pattern (n-M holes on D1 bolt circle), side cross-section with DN bore dimension and face-to-face dimension L, parts list callouts numbered 1–12 (handwheel/gearbox=1, gearbox housing=2, stem/shaft components=3–6, body=7–10 area), and enlarged detail section 'A' showing disc, body, clamp, and multi-level seal packing collar arrangement

Description

A triple eccentric butterfly valve with metal-to-metal seating, designed for high-temperature, abrasive, and high-pressure applications. Features an offset disc geometry that minimises wear during operation. Available in multiple body materials including carbon steel, stainless steel, and various alloys.