Hydraulic Lug Butterfly Valve

Name: Hydraulic Lug Butterfly Valve
Brand: Euro Flow Control
SKU: EFC-286
Availability: InStock

Debug · supplier source (internal only)

Supplier product page ↗EFC datasheet PDF ↗supplier: watts · ref: 286

Specifications

Confirmed at quote

Size Range: DN900-DN1000
Pressure Class: PN10/PN16
Standards: ANSI B16.10, BS5152
End connection: Lug type

Available sizes

Standard DN sizes covered by this product. Confirmed at quote.

DN900 DN1000

Available pressure classes

Pressure classes this product is rated to.

PN10 PN16

Configure your variant(manually adjust box on the right if you require a different spec)

Size
Pressure
End connection

Materials

All available material options per part. Click a pill to set it in the configurator.

body
disc
seat
stem
shaft
bushing
o ring
fixed card board

Dimensions per size(2 sizes)

Size	C	PN10_D1	PN10_n-M	Weight
DN900	203 mm	1050 mm	28-M30 null	—
DN1000	216 mm	1160 mm	28-M33 null	—

Operating media

chemicalsairwatersteamoilacidssalts

Actuation options

hydraulic

Approvals

Lloyd's Register (LR) type approvalECM – Ente Certificazione MacchineISOEAC (Eurasian Conformity)CE markingBureau VeritasACS (Attestation de Conformité Sanitaire – French drinking water approval)WRAS Approved Product (UK Water Regulations Advisory Scheme)

Features

Compact structure
Quick response
Suitable for automation
Corrosion-resistant materials
Compatible with clean or lightly contaminated water applications
Triple-offset / double-offset lug-type butterfly valve body
Hydraulic cylinder actuator (double-acting) with hydraulic hose connections
Solenoid valve mounted on actuator
Flow control valve mounted on actuator
Proximity sensor for end-position detection
Parts numbered 1–8 on sectional diagram: (1) lower stem/bottom bearing, (2) body/seat area, (3) disc, (4) seat/seal ring, (5) upper stem bearing, (6) stem, (7) actuator bracket/yoke, (8) hydraulic cylinder
Lugged body with through-bolting arrangement (n-M bolt pattern)
Bore diameter referenced as ØD1 on drawing
Face-to-face dimension referenced as C on drawing
DN1000 size visible cast on valve body

Notes

Customisable solutions tailored to project specifications available on request.
Products hold up to 10 international authoritative certification certificates.
Diagram: Front elevation (left) showing lug butterfly valve body with flange bolt pattern (n-M holes) and bore diameter ØD1; side cross-section (centre/right) showing internal disc, stem, seat, bearing arrangement with parts 1–8 labelled, hydraulic cylinder actuator, solenoid valve, flow control valve, and proximity sensor detail view (top right)

Description

A lug-type butterfly valve actuated by a hydraulic actuator, designed for medium-pressure water systems and industrial fluid handling applications. The body and disc are fabricated from carbon steel with epoxy coating, fitted with an EPDM seat and stainless steel shaft. Available in DN900 and DN1000 sizes to PN10/PN16 pressure ratings.