Cast Iron Wafer Butterfly Valve

Datasheet

Specifications are indicative. Final specification is confirmed at quotation.

Size Range

DN50-DN1000

Pressure Class

PN10 / Class 300

Standards

API609, ANSI16.34, JISB2064, GB T12238, DIN3202, ISO5752, BS5155, API598, ISO5211, DIN2501 PN10/16, ANSI 125/150/300, BS4504, JIS10K

End connection

Wafer DIN2501 · Wafer ANSI · Wafer BS4504 · Wafer JIS

Operating temperature

-10°C to +120°C

Available sizes

Standard DN sizes covered by this product. Confirmed at quote.

Configure your variant(manually adjust box on the right if you require a different spec)

Size

DN50 (2")DN65 (2 1/2")DN80 (3")DN100 (4")DN125 (5")DN150 (6")DN200 (8")DN250 (10")DN300 (12")DN350 (14")DN400 (16")DN450 (18")DN500 (20")DN600 (24")DN700 (28")DN800 (32")DN900 (36")DN1000 (40")

Pressure

PN10PN16PN25PN40PN64PN100PN160PN250Class 150Class 300

End connection

Wafer DIN2501Wafer ANSIWafer BS4504Wafer JIS

Materials

All available material options per part. Click a pill to set it in the configurator.

body

CIDICSSS

disc

CF8CF8MDI+NiSS304

seat

EPDMNBRPTFEVITONHYPALON

stem

SS416SS316SS304CS

shaft

SS416SS316SS304CS

bushing

PTFEBronze

o ring

NBREPDM

pin

SS

Operating media

Actuation options

Approvals

Features

• Compact wafer-type body for installation between flanges
• Low operating torque
• Tight sealing mechanism for shut-off and flow regulation
• Top flange to ISO5211 for actuator mounting
• Multiple body, seat, disc, and stem material options
• Wafer-style butterfly valve with lever-lock handle
• Rubber-lined body with stainless steel disc
• Bottom shaft stub visible (double-stub shaft configuration)
• Bolt-through lug pattern with 4-bolt configuration on smaller sizes
• Parts labelled 1-7 in sectional drawing: (1) bottom shaft, (2) body/seat liner, (3) disc, (4) body, (5) upper shaft, (6) packing/gland, (7) top plate/actuator mounting
• Dimension references: C = face-to-face, d0 = shaft diameter, K = ISO 5211 actuator bolt circle, E = actuator bolt hole spacing, z-d = actuator bolt count and diameter, g = actuator flange diameter, h = top flange height, p = bottom shaft stub length, D1 = flange bolt circle diameter, n-Ød1 = bolt count and hole diameter
• Flange drilling to PN10, PN16, ANSI 150, JIS 10K

Notes

• Can be customised to meet specific project requirements
• Header listing states DN50–DN1200; specification table states DN50–DN1000
• Diagram: Sectional cross-section view of wafer butterfly valve showing 7 numbered components with dimensional callouts: Ød0 (shaft diameter), Ødg (top flange diameter), h (top flange height), C (face-to-face length), ØE and ØK (actuator mounting bolt circle), z-Ød (bolt holes), p (bottom stub length)
• Diagram: Front elevation and plan view showing ØD1 (flange bolt circle) and n-Ød1 (bolt count/diameter)
• Diagram: Bottom view showing dimension b (bottom flange)

Description

A wafer-type butterfly valve with a cast iron body designed for installation between flanges. Available in multiple body, disc, seat, and stem material combinations to suit a range of media. Suitable for water supply, HVAC, industrial circulation, and wastewater treatment applications.

Available pressure classes

Pressure classes this product is rated to.