Ball Type Check Valve

Name: Ball Type Check Valve
Brand: Euro Flow Control
SKU: EFC-247
Availability: InStock

Debug · supplier source (internal only)

Supplier product page ↗EFC datasheet PDF ↗supplier: watts · ref: 247

Specifications

Confirmed at quote

Size Range: DN50-DN600
Pressure Class: PN10/PN16
Standards: ANSI B16.10, BS5152, ENSIONS

Available sizes

Standard DN sizes covered by this product. Confirmed at quote.

DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600

Available pressure classes

Pressure classes this product is rated to.

PN10 PN16

Configure your variant(manually adjust box on the right if you require a different spec)

Size
Pressure
End connection

Materials

All available material options per part. Click a pill to set it in the configurator.

body
bonnet
bolt
seal

Dimensions per size(14 sizes)

Size	L	D_PN10	D1_PN10	D2_PN10	n_d_PN10	D_PN16	D1_PN16	D2_PN16	n_d_PN16	Weight
DN50	200 mm	165 mm	125 mm	102 mm	4-18 mm	165 mm	125 mm	102 mm	4-18 mm	—
DN65	240 mm	185 mm	145 mm	122 mm	4-18 mm	185 mm	145 mm	122 mm	4-18 mm	—
DN80	260 mm	200 mm	160 mm	138 mm	8-18 mm	200 mm	160 mm	138 mm	8-18 mm	—
DN100	300 mm	220 mm	180 mm	158 mm	8-18 mm	220 mm	180 mm	158 mm	8-18 mm	—
DN125	350 mm	250 mm	210 mm	188 mm	8-18 mm	250 mm	210 mm	188 mm	8-18 mm	—
DN150	400 mm	285 mm	240 mm	212 mm	8-23 mm	285 mm	240 mm	212 mm	8-23 mm	—
DN200	500 mm	340 mm	295 mm	268 mm	8-23 mm	340 mm	295 mm	268 mm	12-23 mm	—
DN250	600 mm	395 mm	350 mm	320 mm	12-23 mm	405 mm	355 mm	320 mm	12-27 mm	—
DN300	700 mm	445 mm	400 mm	370 mm	12-23 mm	460 mm	410 mm	378 mm	12-27 mm	—
DN350	800 mm	505 mm	460 mm	430 mm	16-23 mm	520 mm	470 mm	438 mm	16-27 mm	—
DN400	900 mm	565 mm	515 mm	482 mm	16-27 mm	580 mm	525 mm	490 mm	16-30 mm	—
DN450	1000 mm	615 mm	565 mm	530 mm	20-27 mm	640 mm	585 mm	550 mm	20-30 mm	—
DN500	1100 mm	670 mm	620 mm	585 mm	20-27 mm	715 mm	650 mm	610 mm	20-33 mm	—
DN600	1300 mm	780 mm	725 mm	685 mm	20-30 mm	840 mm	770 mm	725 mm	20-36 mm	—

Operating media

cold waterhot waterwastewaterslurrymedia with suspended solids

Approvals

LR (Lloyd's Register) approvalECM (Ente Certificazione Macchine) certificationISOEACCE markingBureau Veritas certificationACS (Attestation de Conformité Sanitaire)WRAS Approved Product

Features

Ball disc covered with rubber for sealing
One-way flow with automatic reverse flow blocking by gravity or pressure difference
Full-bore water channel providing large flow capacity
Head loss less than swing check valve by 50%
Suitable for horizontal or vertical installation
Self-cleaning internal ball seat resistant to clogging
Compact design with minimal space requirements
Flanged end connections
Ball-type check mechanism (ball visible in sectional cross-section)
Top-access cover retained by bolts (parts 2 and 4 in sectional diagram)
Flow direction arrow cast into body
Drain/bleed plug fitted at bottom of body
Pressure rating PN16 cast into body
Body material grade GG50 (grey cast iron EN-GJL-250) cast into body
Dimensional references L (face-to-face), ØD (flange OD), ØD1 (bolt circle diameter), ØD2 (bore/port diameter) shown on cross-section drawing

Notes

Available in ductile iron, cast iron, and stainless steel options
Diagram: Cross-sectional elevation of a flanged ball check valve showing internal ball element seated in the inclined bore. Parts labelled 1 (body), 2 (cover bolts/studs), 3 (cover/bonnet), 4 (cover bolts/studs). Dimensional callouts: L = face-to-face length; ØD = flange outside diameter; ØD1 = bolt-circle diameter; ØD2 = bore diameter.

Description

A ball type check valve using a rubber-covered ball as the disc, which moves by pressure difference or gravity to permit one-way flow and block reverse flow. The valve body provides a full-bore water channel with low fluid resistance, stated to reduce head loss by 50% compared to a swing check valve. Suitable for horizontal or vertical installation in cold or hot water pipelines, wastewater, slurry, and media with suspended solids.